If you use Linux, the process of finding out what motherboard you have is just as easy. First, open your Terminal in Linux using Ctrl + Alt + T. Next, type in the following command: sudo dmidecode -t 2. This will bring up a summary of your motherboard, including its brand, model, and serial number. Check the manual: The manual for your motherboard should have information about the onboard audio features. Check the device manager: On Windows, you can open the Device Manager and look for “Sound, video, and game controllers” in the list. If you see a device listed under this category, it means your motherboard has a built-in sound card. Key Takeaways. To clear your CMOS, first boot into the BIOS or UEFI. Select the "Reset to Default," "Load Setup Defaults," or something similar. If you can't access the BIOS, press the CMOS clear button instead. The CMOS clear button may be located on the back of a computer's case near its ports or on the PC's motherboard itself. Enter your motherboard model in the search box on the left, click on the corresponding model in the model list prompted below, and then select "Manuals and Documents" on the right. Refer to the image below: The motherboard connections is a guide that will help you make the best cable connection. It includes the motherboard ports, the connectors, and what cables to use for your setup. January 4, 2024. January 4, 2024. If you’re building a computer from scratch for the first time, the only issue you’ll have is connecting the wires to the USB headers on a motherboard are simply the connectors that ensure USB devices are correctly connected. Generally, they are located on the bottom or the right side of the circuit board, depending on the type of USB header. To locate the USB headers, navigate to your motherboard and find the labels having F_USB, J_USB, FPANEL_USB, F_USB2, or Intel Server Motherboard AMD Server Motherboard Workstation Motherboard Professionals that work in AI, animation, and data science rely on solid, scalable, and performant workstation boards. Once you open your computer or notebook you should find a small jumper next to the CMOS battery . It should read: “ reset CMOS ” on the actual motherboard. Remove the jumper and don’t replace it until after 20 seconds or longer. Place the jumper back the exact same way it was removed. Close the computer, plug the cables back in and start QFsN.